“FLASH INTERNAL” flagpole

Before you start, visit our blog and check the GUIDE (click here), we prepared, to make everything clear for you!

• Mast Structure and Design
  • Segmented Construction: The mast is composed of multiple segments, allowing for easy transportation and assembly. Each segment fits into the next with a 50 cm overlap, ensuring stability and structural integrity.
  • Material and Finish: The mast is made from high-quality aluminium with an lacquered coating for corrosion resistance. It has a modern, shiny, brushed finish that complements both contemporary and classic settings.
  • Vibration Reduction: Rubber bumpers are installed around segment joints to minimize vibrations and ensure a secure fit. A color-matched reducing sleeve is used at segment junctions.
• Rotating Head
  • Default Feature: The mast includes a rotating head equipped with an internal flag-raising system. This system allows the flag to rotate freely with the wind, preventing tangling and reducing wear.
  • Threaded Hole for Finials: The rotating head features a threaded hole for attaching decorative finials. A pulley system inside the head minimizes friction during flag hoisting.
• Decorative Finials
  • Type 1: Bulb-shaped finial with an elongated tip. Available in gold, silver, and matte gray.
  • Type 2: Flattened sphere finial resembling a geoid or donut. Available in gold, silver, and matte gray.
  • Customization: Custom colors from the RAL palette are available upon request.
• Internal Flag Hoisting Systems
  • Manual System: The halyard is locked at 150 cm from the ground, with the line concealed within the mast for a clean appearance and noise reduction. It features a Kevlar-reinforced line for durability.
  • Crank System: The flag is raised and lowered using a crank and a concealed drum system, which is locked at 150 cm from the ground. The removable crank prevents unauthorized lowering of the flag. The system is compatible with masts of varying heights.
• Flagpole Bases
  • Type 1: Suitable for 6-8 meter poles with a 75 mm diameter lower segment. Made from hot-dip galvanized steel, it features a 165 mm triangular base with 16 mm threaded rods.
  • Type 2: Designed for 9-11 meter poles with a 90 mm diameter lower segment. It also has a 165 mm triangular base, but with 20 mm threaded rods.
• Ground Mounting Systems
  • Concrete Anchor Basket: Permanent mounting system with threaded rods for leveling, suitable for poles of varying heights.
  • Gabion Mount: Steel mesh basket filled with stones, ideal for non-tilting poles. Provides stability and durability.
  • Concrete Slab Mount: A portable system for poles up to 8 meters, using concrete slabs as ballast.
• Windtracker
  • Standard Model: Made from anodized aluminum with plastic connectors, designed to keep flags visible even in calm weather. It includes plastic end caps and connectors, offering good weather resistance.
  • INOX Model: Constructed from stainless steel and anodized aluminum, featuring a spring-dampened elbow joint for enhanced durability in severe weather conditions.
• Plastic Fasteners for Flags
  • Standard: Detachable plastic fastener with a steel connector.
  • Shark: Single-use plastic fastener with an aluminum connector.
  • Compatibility: Available for masts of varying heights, with fasteners designed to secure the flag effectively.

• Flag Weight Stabilizers
  • DROP: 600g plastic stabilizer with an integrated steel weight, suitable for 6-11 meter poles.
  • Sandbag (300g & 600g): Lighter options for shorter poles, providing stability in moderate winds.
  • ROLLER: 800g stabilizer for taller poles, offering maximum security for large flags in strong winds.